HANNA HI 8732N EC, TDS and Temperature Meters

HANNA HI 8732N EC, TDS and Temperature Meters, HI 8732 HI8732

HI 8732N is a complete, versatile and water-tight conductivity meter, that can measure EC in the 0 to 4 mS/cm range, TDS from 0 to 1999 ppm, and temperature from 0 to 70°C. The desired measurement mode is easily selectable through a membrane keyboard on the front panel. Conductivity measurements are automatically compensated for temperature changes with a fixed coefficient of 2%/°C. The HI 761285 probe features a built-in temperature sensor, and it has been designed to require little maintenance. The meter can be calibrated at one point for EC or TDS, while the temperature range is factory calibrated.

* Large CD * Tutorial messages for EC/TDS Calibration * Faster nad Easier to Calibrate

Order Information: The HI 8732N is supplied with: HI 761285 conductivity probe with built-in temperature sensor, DIN connector and 1 m (3.3") cable HI 70031 (1413 µS/cm) calibration solution sachet HI 70442 (1500 ppm) calibration solution sachet Battery & instructions

* Specifications * MSDS * Accessories

Range EC 0.00 to 4.00 mS/cm Range TDS 0 to 1999 ppm Range Temperature 0 to 70°C* (*) If using HI 761285 probe, it is recommended to not exceed 50°C Resolution EC 0.01 mS/cm Resolution TDS 1 ppm Resolution Temperature 0.1°C Accuracy EC ±2% f.s. Accuracy TDS ±2% f.s. Accuracy Temperature ±0.5°C TDS Factor Variable, 0.56 to 0.72 Calibration EC Manual, 1 point, through front knob Calibration TDS Manual, 1 point, through front knob Calibration Temperature Factory calibrated Probe HI 761285 (included) Temperature Compensation Automatic, 0 to 50°C (32 to 122°F) with β=2%/°C Environment 0 to 50 °C (32 to 122°F); RH max 100% Battery Type / Life 1x9V alkaline / approx. 250 hours Dimensions 164 x 76 x 45 mm (6.4 x 3.0 x 1.8’’) Weight 250 g (8.8 oz.)