Milwaukee Instruments SM101 Smart pH Meter

1. MA9015 storage solution

2. MA9016 cleaning solution

3. pH 7 buffer for one point pH calibration

4. And pH 4 or pH 10 for two point pH calibration.

Always rinse the pH electrode with water between calibrations and testings. Clean the electrode by soak it in MA9016 electrode cleaning solution for about 3 minutes once a day or at least once a week to prevent clogging and to maintain accuracy.

Place a small sponge in the bottom of the pH meter cap, and pour some MA9015 storage solution into the cap to keep probe wet for probe storage. Never let probe dry and Never use distilled/deionized water for probe storage.