EMAIL: sales@eseasongear.com
Milwaukee MA957 CO2 Regulator +10 ft CO2 Tubing, 110V only!
Milwaukee Instruments MA957 CO2 Adjustable Flow Pressure Regulator + Free 10 ft CO2 Proof Tubing!
*** For CO2 Tank with a CGA-320 valve ONLY!
Includes flow regulator, needle valve, electronic solenoid & bubble counter. Unit comes with dual gauges each with dual reading of both psi & kg/cm. Left gauge meters tank capacity and right gauge meters flow. Needle valve flow control provides for precise measurement. The solenoid valve comes with a 1.5 meter power cord. (CO2 bottle is not included)
Recommended best if used with our pH controller Model SMS122
Check out the Manual link for Safety and Operation Instructions! CGA320
Accessories
 Milwaukee Instruments MA957 Set Up & Adjustment *** Per Milwaukee MA957 Operating Instruction below, the right side gauge is not relevant to adjusting your gas flow, the right side needle could be Non-functional at all. The bubble counter is your only true and accurate gauge of gas flow. Therefore, any reference to the right side gauge serves no purpose and is not necessary in the proper setup of the regulator. The MA957 Regulator set up procedure & gas flow adjustment is as follows: |  CO2 Proof Tubing, 10 Ft Clear PVC, for CO2 Regulator Diffuser 1/8" ID x 3/16" OD 1/8" ID x 3/16" OD, Clear PVC, 44 PSI This Tubing will fit directly to Milwaukee MA957 CO2 Regulator Combo & MA955 Solenoid Valve tube fittings, and many other CO2 Products. Each order will be shipped full-length uncut. http://www.coleparmer.com/techinfo/t...tingTubing.htm CO2 permeability (cc.mm/cm2.sec.mmHg) x 10^-10) (lower number = better) FEP @5.9 PTFE @ 6.8 PVC @ 6.8 Nylon @ 20 Viton @ 79 Polypropylene @ 90 Tygon Fuel @ 100 Polyethylene @ 280 Tygon Lab @ 360 Vinyl @ 360 Polyurethane (clear and aqua-tint) @ 395 Norprene @ 1200 Gum Rubber @ 1311 Tygon Pressure @ 2700 Tygon Ultra-chem resistant @ 4840 Silicone @ 20,132 $3.99 |
Milwaukee Instruments New MC122 (old SMS122) pH Controller, SMS 122, CO2, w/ Probe pH CONTROLLER, RANGE: 0.0 to 14.0, WITH �0.2 pH ACCURACY AND 2 POINT MANUAL CALIBRATION. SET POINT RANGE 5.5 TO 9.5 pH, AND LED VISUAL ALARM ACTIVE WHEN READING IS HIGHER THAN SET POINT. POWER PLUG SOCKET FOR CO2 DOSING. SUPPLIED WITH 12 V DC POWER ADAPTER, MA911B/2 DOUBLE JUNCTION pH ELECTRODE, 20 ml. pH 7.01 SACHET BUFFER SOLUTION AND SCREWDRIVER FOR CALIBRATION. $120.00 | 
User Instruction ManualMilwaukee MC122 (SMS122) pH Controller + MA957 CO2 Adjustable Flow Pressure Regulator COMBO New MC122 (Old SMS122) pH CONTROLLER, 110V RANGE: 0.0 to 14.0, WITH ±0.2 pH ACCURACY AND 2 POINT MANUAL CALIBRATION. SET POINT RANGE 5.5 TO 9.5 pH, AND LED VISUAL ALARM ACTIVE WHEN READING IS HIGHER THAN SET POINT. POWER PLUG SOCKET FOR CO2 DOSING. SUPPLIED WITH 12 V DC POWER ADAPTER, MA911B/2 DOUBLE JUNCTION pH ELECTRODE, 20 ml. pH 7.01 SACHET BUFFER SOLUTION AND SCREWDRIVER FOR CALIBRATION. MA957 CO2 REGULATOR, 110V - For CO2 Tank with CGA-320 valve only. With CO2 Solenoid Diaphragm Valve. Includes flow regulator, needle valve, electronic solenoid & bubble counter. Unit comes with dual gauges each with dual reading of both psi & kg/cm. Left gauge meters tank capacity and right gauge meters flow. Needle valve flow control provides for precise measurement. The solenoid valve comes with a 1.5 meter power cord. Recommended best if used with our pH controller Model SMS122 List: $200.00 Sale: $195.00 |
sales@eseasongear.com - We accept credit cards via PayPal, no PayPal account is required