Please read store policy before placing your order!
HM Digital PS-100 Panel Mount TDS/ppm Controller w/ Sensor
HM Digital PS-100 Panel Mount TDS Controller with Sensor, PS100
Install the Panel Mount Total Dissolved Solids Controller to constantly monitor TDS levels of water produced by a high-output system.
FEATURES
* Monitors and controls TDS levels for high output commercial systems. * Large, bright L.E.D. display. * An alarm will sound if the TDS level rises above the user-set level. * Installs easily in minutes. * Includes one sensor probe (at no extra cost). * Protective cover also available (sold separately)
SPECIFICATIONS
Range: 0 - 999ppm Accuracy: ±2% Resolution: 1 PPM ATC: Yes (1 - 65 degrees Celsius) Calibration: Adjustable (manual) Setting: Controlled by on-screen up/down buttons Relay Control: The unit will open or close a circuit via dry contacts when the ppm level reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. Relay Voltage: 5V Alarm: Optional steady beep (set by user) Display: Bright 5/8" L.E.D. display Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable Power supply: AC 110V / AC 220V Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.) Monitor Weight: 476 g (1 lb .8 oz) Total Weight: 680.4 g (1 lb 8 oz)
Install the Panel Mount Total Dissolved Solids Controller to constantly monitor TDS levels of water produced by a high-output system.
FEATURES
* Monitors and controls TDS levels for high output commercial systems. * Large, bright L.E.D. display. * An alarm will sound if the TDS level rises above the user-set level. * Installs easily in minutes. * Includes one sensor probe (at no extra cost). * Protective cover also available (sold separately)
SPECIFICATIONS
Range: 0 - 999ppm Accuracy: ±2% Resolution: 1 PPM ATC: Yes (1 - 65 degrees Celsius) Calibration: Adjustable (manual) Setting: Controlled by on-screen up/down buttons Relay Control: The unit will open or close a circuit via dry contacts when the ppm level reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. Relay Voltage: 5V Alarm: Optional steady beep (set by user) Display: Bright 5/8" L.E.D. display Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable Power supply: AC 110V / AC 220V Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.) Monitor Weight: 476 g (1 lb .8 oz) Total Weight: 680.4 g (1 lb 8 oz)
We accept credit cards via PayPal, no PayPal account is required, please click PAYMENTS for details.