Please read store policy before placing your order!
HM Digital PS-200 Panel Mount Dual TDS Controller, Sensor Included
*** Use Coupon Code "hmdigital" at check out to find our promotion price
HM Digital PS-200 Panel Mount Dual TDS Controller w/ Sensors, PS200
Install the Dual TDS Controller to constantly monitor TDS levels of water produced by a high-output system. Immediately know if the TDS levels rise above an acceptable level. FEATURES
* Monitors and controls TDS levels of two water lines (e.g., feed water and product water) for high output commercial systems. * Large, bright L.E.D. display. * An alarm will sound if the TDS level rises above the user-set level for the output water. * Installs easily in minutes. * Includes two sensor probes (at no extra cost). * The PS-200 is a monitor for Line 1 (in-line) and a controller for Line 2 (out-line). * Protective cover also available (sold separately)
SPECIFICATIONS
Range: 0 - 999ppm Accuracy: ±2% f.s. Resolution: 1 PPM ATC: Yes (1 - 65 degrees Celsius) Calibration: Adjustable Setting: Controlled by on-screen up/down buttons Relay Control: The unit will open or close a circuit via dry contacts when the ppm level (out line/line 2 only)reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. (In line/Line 1 does not have a control function) Relay Voltage: 5V (simple switch) Alarm: Optional steady beep for Out line/Line 2 (set by user) Display: Bright 5/8" L.E.D. display 2 Probes: 1/2" bushing, 3 meter (9.8 ft) shielded cable Power supply: AC 110V / AC 220V Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.) Monitor Weight: 476 g (1 lb .8 oz) Total Weight: 822.1 g (1 lb 13 oz)
HM Digital PS-200 Panel Mount Dual TDS Controller w/ Sensors, PS200
Install the Dual TDS Controller to constantly monitor TDS levels of water produced by a high-output system. Immediately know if the TDS levels rise above an acceptable level. FEATURES
* Monitors and controls TDS levels of two water lines (e.g., feed water and product water) for high output commercial systems. * Large, bright L.E.D. display. * An alarm will sound if the TDS level rises above the user-set level for the output water. * Installs easily in minutes. * Includes two sensor probes (at no extra cost). * The PS-200 is a monitor for Line 1 (in-line) and a controller for Line 2 (out-line). * Protective cover also available (sold separately)
SPECIFICATIONS
Range: 0 - 999ppm Accuracy: ±2% f.s. Resolution: 1 PPM ATC: Yes (1 - 65 degrees Celsius) Calibration: Adjustable Setting: Controlled by on-screen up/down buttons Relay Control: The unit will open or close a circuit via dry contacts when the ppm level (out line/line 2 only)reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. (In line/Line 1 does not have a control function) Relay Voltage: 5V (simple switch) Alarm: Optional steady beep for Out line/Line 2 (set by user) Display: Bright 5/8" L.E.D. display 2 Probes: 1/2" bushing, 3 meter (9.8 ft) shielded cable Power supply: AC 110V / AC 220V Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.) Monitor Weight: 476 g (1 lb .8 oz) Total Weight: 822.1 g (1 lb 13 oz)
We accept credit cards via PayPal, no PayPal account is required, please click PAYMENTS for details.