HM Digital PS-202 Panel Mount Dual Display TDS Controller, Sensor Included

User Instruction Manual

HM Digital PS-202 Panel Mount Dual Display TDS Controller w/ Sensors, PS202

The PS-202 allows for continuous and simultaneous monitoring and control of TDS levels on two water lines. FEATURES

* Simultaneously monitors and controls the TDS levels of two water lines (e.g., the feed water and product water) for high output commercial systems. * Large, bright L.E.D. displays. * An alarm will sound if the TDS level rises above the user-set level for both lines. * Installs easily in minutes. * Includes two 1/2" sensor probes (at no extra cost).

SPECIFICATIONS

Range: 0 - 999ppm Accuracy: ±2% Resolution: 1 PPM ATC: Yes (1 - 65 degrees Celsius) Calibration: Adjustable Setting: Controlled by on-screen up/down buttons Relay Control: The unit will open or close a circuit via dry contacts when the ppm level of the output water (line 2) or input water (line 1) reaches or exceeds its control setting (simple switch). The PS-202 can be used to control one or two pumps, solenoid valves or other device. Relay Voltage: 5V Alarm: Steady beep for both lines Display: Bright 5/8" L.E.D. dual displays 2 Probes: 1/2" bushing, 3 meter (9.8 ft) shielded cable Power supply: AC 110V / AC 220V Dimensions: 9.4 x 9.4 x 12.5 cm (3.7 x 3.7 x 4.9 in.) Monitor Weight: 569.8 g (1 lb 4.1 oz) Total Weight: 938.4 g (2 lbs 1.1 oz)